Miele Port Devices Driver Download For Windows 10

21-04-2021
 |  [RAND-100] - Comments



The CH340 chip is used by a number of Arduino compatible boards to provide USB connectivity, you may need to install a driver, don’t panic, it’s easier than falling off a log, and much less painful.

Open Start Settings Devices Printers & scanners. Select the name of the printer, and then choose Remove device. To reinstall the printer, select Add a printer or scanner and then select the name of the printer you want to add. If Windows doesn’t automatically find a new driver after the printer is added, look for one on the device.

PC Pitstop - PC Performance Roots. PC Pitstop began in 1999 with an emphasis on computer diagnostics and maintenance. During the early days of the dot com boom, our online PC maintenance tools were skyrocketing. Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port Click Driver in the Windows Properties section The driver must be numbered as '2.0.2.8' and dates accordingly If the driver was not installed, remove the Serial adapter then run 'PL2303DriverInstaller.exe' again. Update Your System Drivers. Although Windows 10 should have the USB 3.0 drivers you need to use your compatible devices, it may be some other drivers are too out of date to work properly. To update them, you need to know the name and model of your system or device. If you want to be specific, know the motherboard make and model, too. This will enable your computer to communicate with audio devices such as speakers and sound cards. It is important to have a 64-bit version of a Windows operating system installed in your computer before downloading Realtek HD Audio Drivers x64. It can either be Windows Vista, Windows 7, Windows 8, or Windows 10.


Windows

(Manufacturer’s Chinese Info Link)

  1. Download the Windows CH340 Driver
  2. Unzip the file
  3. Run the installer which you unzipped
  4. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Older Windows Driver Version and Instructions

  1. Download the Windows CH340 Driver
  2. Unzip the folder.
  3. If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
  4. If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.
  5. If you don’t know, try the 64 bit and if it doesn’t work, the 32 bit.
  6. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Macintosh

(Manufacturer’s Chinese Info Link)

The following github has up to day pkg files for 1.3, 1.4 and 1.5 at time of writing, thanks to Joshua Wallis for bringing this to my attention…

Direct Download Links (from the github repo above):

See the github link above for installation instructions if you need them.

Previous macinstosh downloads if the above doesn’t work for you…

(V1.3) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11) and Sierra (10.12)

Inside the zip file you will find a PDF and a “pkg” file, short version, double click the pkg file, the PDF has some extra information.

OSX Sierra (10.12) Note

For

A kindly user, Maarten Segers reports

FYI, the driver documented here WILL crash on OSX Sierra.

Make sure to use this one instead: https://github.com/MPParsley/ch340g-ch34g-ch34x-mac-os-x-driver

I can personally not test on MacOS and can not vouch for the above drivers at github, but there you go.

See uninstalling information at the bottom of the page if the driver causes problems for you.

Here is an older version of the Mac driver, NOT FOR 10.12 Sierra

(V1.0) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11)

Linux

(Manufacturer’s Chinese Info Link)

Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but I’d recommend just upgrading your Linux install so that you get the “built in” one).

Uninstalling From Macinstosh

A couple of Mac users have said “the driver crashes my mac Sierra how do I uninstall”.

Firstly regards the crash make sure you installed the 1.3 version of the driver, not the old one. You could download it directly from the Manufacturers Website in case they have issued an update since I wrote this page.

Secondly a quick google search reveals that this is how you uninstall:

  1. Open a terminal and type: cd /Library/Extensions/
  2. Verify that the .kext file is present: ls | grep usbserial.kext
  3. Output should be: usbserial.kext
  4. Then type: sudo rm -R usbserial.kext
  5. Verify that the .kext file has been removed: ls | grep usbserial.kext
  6. Output should be empty.
  7. After you should remove the files stored in receipts folder: cd /private/var/db/receipts/
  8. Find the enties: ls | grep usbserial*
  9. Output should be: codebender.cc.ch34xinstaller.usbserial.pkg.bom codebender.cc.ch34xinstaller.usbserial.pkg.plist
  10. Remove each one of the files of the above list: sudo rm -r filename`

1. Features

WO Mic can turn your phone to be a microphone for your computer. You need not to pay a cent to buy any gadget. And it's mobile if you choose wireless transport. Millions of people have installed it and are using it daily for talking, recording, voice remote control and many other activities.

Three components cooperate to achieve that:

  1. WO Mic App which runs on phone. It captures your voice through phone microphone and transmit them to computer.
  2. WO Mic Client which runs on computer. It connects to app, receives voice data and passes them to virtual mic device.
  3. WO Mic Virtual Device which also runs on computer, though in kernel space. It receives voice data from client program, simulates a real microphone device, and provides audio data to applications like Sound Recorder.

Below diagram shows how captured voice data is flowing through these components:

Main features:

  • Wireless microphone without any cost
  • Can be used with any programs on PC just like REAL microphone
  • Very short lag
  • Easy to configure and use
  • Supports auto reconnection when your PC reboots
  • Support multiple connection methods: USB, Bluetooth, Wi-Fi, and Wi-Fi direct
  • Audio format: 48000 sampling rate, 16 bits per sample, mono channel

2. Download and install

You need to install all 3 WO Mic components mentioned above. Note below sections assume Windows operating system on PC. If you are running Linux, refer to Linux setup.

2.1 Install app on phone


Miele Port Devices Driver Download For Windows 10 Free

If you cannot access Google Play market, download WO Mic apk directly.

2.2 Install client on PC

Download and run the setup program to install the client.

FileSizeVersion
WO Mic client for Windows1,151,945 bytes4.7

2.3 Install device driver on PC

WO Mic device drivers are available for Win7/8/10. Supported processors are x86 and x64.

FileSizeVersion
WO Mic device driver for Windows242,645 bytes1.6.0.0

Once the driver is installed successfully, WO Mic device will be created automatically. Follow these steps to check if the device exists and is working properly:

  • Press Windows + X and click Device Manager in the pop menu.
  • In Device Manager, go to Sound, video and game controllers.
  • WO Mic device should be listed and work well as shown in below diagram.

3. User guide

3.1 Choose transport

Depending on system, different transports may be selected as the communication channel between your phone and computer:
  • iPhone: Wi-Fi
  • Android: USB, Bluetooth, Wi-Fi and Wi-Fi Direct
Choose appropriate transport you shall use.
3.1.1 USB transport
We recommend USB transport whenever possible, as it is more robust than wireless connections. It also has lower latency and higher bit rate. To use USB connection, follow these:
  • Connect your phone and PC via an USB cable.
  • Enable USB debugging on Android phone.
  • On PC, install right USB driver for your phone. You may consult your vendor for that.
If all have been done well, your phone is identified as one USB device with name 'ADB Interface':
  • Press Windows + X and click Device Manager in the pop menu.
  • In Device Manager, go to Universal Serial Bus devices.
  • In the list, you are expected to find something like ADB Interface.

3.2 Configure and start server on phone

Launch WO Mic on phone. Before staring the server, you can go to Settings to configure what you prefer.

3.2.1 Transport option
Select the transport you would. Requirements for each transport:

Miele Port Devices Driver Download For Windows 10 64

  • USB transport. ADB Interface should be seen as described in 3.1.1; otherwise it will report no device can be detected.
  • Bluetooth. Pair your phone with computer if you haven't done that. Turn on Bluetooth on both phone and computer.
  • Wi-Fi. Turn on Wi-Fi on both phone and computer and connect them to same hotspot.
  • Wi-Fi Direct. Turn on SoftAP on phone and connect PC to this AP.
3.2.2 Control port option
This port number should be same as in client; otherwise, connection will fail. If no special reasons, don't change it.

Note media port can only be configured in client. It shall be synced to server when making connection.

3.2.3 Audio source option

There are 5 mic modes. Due to different Android phone hardware and OEM customization, not all modes may be supported on your phone. Even some are supported, they may not have same effect as described here. So please take below mode description as a hint and explore each mode on your phone to select appropriate one.

  • Default. Phone embedded microphone.
  • Mic mode 1. Try this if you want to use external wired headset.
  • Mic mode 2. Try this if there are echoes with other modes.
  • Mic mode 3. Try this if you will speak at a long distance or noisy environment.
  • Rear mic. Try this if you want to better capture sound from back.
3.2.4 Start server

Once all have been configured, go to main UI and press Start button to start server. If it prompts not enough permission, grant microphone or audio record permission to this app.

Once the state changes to Started or Connectable, the server is ready to accept connection request from client.

3.3 Connect from client

On Windows, follow these steps to connect:

Miele Port Devices Driver Download For Windows 10 Windows 10

  1. Launch WO Mic client. If you meet 'MSVCP140.dll is missing' or similar error on Win7/8/8.1, please either upgrade your Windows, or install KBA2999226 and KBA3118401 from Microsoft.
  2. Select Connection ->Connect...
  3. In connect dialog, select same transport type as you did on phone in 3.2.
  4. In Details pane, specify auxiliary connection parameters:
    • Bluetooth. Select the phone Bluetooth name in the dropdown list.
    • USB. None.
    • Wi-Fi. Enter the IP address shown on server.
    • Wi-Fi Direct. Enter the IP address of SoftAP. Use the default if you don't know what it is.
  5. Click Connect.

Once client shows to be connected, audio data captured by phone will be streamed to computer.

3.4 Verify streaming is going well

Before using WO Mic device, you may want first to verify audio is being streamed correctly from phone to PC. To do that, play received audio data directly:
  • Click Options menu in WO Mic client.
  • Enable Play in speaker.
  • Unmute PC speaker.
If everything goes well, you can hear sound captured by phone.

3.5 Use WO Mic device

Set WO Mic device as input for your game, recording, chat or any other applications.

Some applications may not allow you to select audio device. For that case, you can set WO Mic device to be default audio recording device in Windows settings.


3.6 Issues caused by anti-virus software

Some anti-virus or firewall software make wrong alarms about WO Mic client or driver. They might even delete related files or block network connection causing WO Mic to malfunction. If you meet those issues, please configure your computer to allow WO Mic to work.

Especially, if WO Mic used to work well and stops working suddenly, it's mostly caused by anti-virus software blocking. Some quick verifications:

  • Change control port from default 8125 to some other value (i.e. 40000) and connect again. Note: same value should be configured on phone app.
  • Re-install client program to some other folder (pretending to be different program) and connect again.

Warning: Never download and install WO Mic client and driver setup programs from untrusted sites. Download from this page(https://wolicheng.com/womic/) and check if downloaded file size matches the informed value.

Contact

Before reporting any issues to us, you are encouraged to check this FAQ page for any known issues and their solutions.

Miele Port Devices Driver Download For Windows 10 64-bit

You can contact us at support@wolicheng.com.